PS 608
55
M139 Mine Dispenser…
mounting volcano on
fmtv
PS 608
JULY 03
54
M17-Series Decon…
Better Adjusting & Fitting
Dear Editor,
This suggestion will make adjusting the M17 decon's flow switch easier:
Once the M17 has been running awhile, it is very difficult to adjust the
flow switch with a normal screwdriver without burning yourself on the
exhaust. We avoided burns by making a long-handled screwdriver out of
1/4-in rod.
Cut off a 3-ft piece and bend one end in a vise to form a handle.
Flatten the other end so it will fit the flow switch screw. Then you can
adjust the switch without getting your hands near the hot exhaust.
SGT Richard Morris
F Co, 782d MSB
Ft Bragg, NC
if you have any
Volcano questions,
contact ardec's
Peter Giotis at DSN
880-5651/(9
7
3)
7
24-
5651 or e-mail him
at
peter.giotis@
us.army.mil
Change 6 to
tm 9-1095-208-10-1
authorized mounting
the Volcano on the
FMTV M1090 5-ton
dump truck.
But to do it you need an adapter kit, which
you can get free from the Armament
Research, Development and Engineering
Center (ardec) by e-mailing
restaino@pica.army.mil
they finally
brought us
together!
here’s where to get
info on mounting the
volcano on the FMTV
dump
truck.
Bend one end for
handle and flatten
other end to fit
switch screw
Use tool to
adjust switch
this
fabricated
tool will
prevent
burned
hands
when
you adjust
the flow
switch.
“Mounting the Volcano on the FMTV
5-ton
cargo
truck is
not
authorized.”