H
alfway is not enough when you unscrew the primary
power cable from the LS-671 loudspeaker on your
SINCGARS vehicular radio. It’s all the way or nothing.
You need to unscrew the cable’s connector the whole
way before trying to unhook the cable. Some folks stop
halfway. Then they
yank and twist the
cable in a vain effort
to take it off. That
just puts stress on
the circuitry inside
the J1 connector. If
the circuitry gets
damaged, no power
gets through to the
loudspeaker.
AUG 04
45
AN/PVS-5 NVD…
D
shipping and storage container for
the AN/PVS-5 night vision device,
from your component-of-end items
list. Check any of those “special
NSNs lists” you have and make sure
that NSN is deleted on them, too.
That container is no longer available.
Instead, use shipping box, NSN
and storage container for the night
vision device. This box is one of the
“Fast Pack” boxes that are supplied
by GSA.
Dear Half-Mast,
We were issued the advanced combat
but there’s a problem. The mounting
bracket for the AN/PVS-14 won’t work
with the ACH. The mount is unstable and
sticks above the curve of the helmet. In
short order, the mount breaks. Is there
anyway to solve this mounting problem?
SPC J.D.J.
Dear Specialist J.D.J.,
Order the new ACH/CVC front bracket kit,
for your AN/PVS-7s as well as the AN/PVS-14s.
Now you no longer have a mounting problem
.
PS 621
AUG 04
44
SINCGARS LS-671…
NSN
Item
Mounting plate
2 machine bolts (5/16-24 x 1 in)
2 lock washers, (5/16 in)
4 flat washers, (5/16 in)
2 hexagon nuts (5/16-24 in)
if you need to
install an LS-6
7
1/VRC,
the SINCGARS loud-
speaker, you’ll
need
these
parts
to do it…
Mounting plate,
Two bolts,
Halfway Is Not THE Way
Unscrew it all the way!
go on,
buddy!
scram!
you’ve been
replaced!
fine!
what
th-!?
how
can I mount
my nvg on
this
thing?!
New S & S Container
LOUDSPEAKING PARTS!
621. 44-45 (C)
7/3/04
1:43 PM
Page 1
Click here for a copy of these articles to email to a friend
Click here for a copy of these articles to email to a friend