O
perators, stay on the level when it comes to an accurate check on your FMTV’s
transmission oil level—and use the right oil.
The check must be made after operations, under the following conditions:
•
the transmission oil at
operating temperature (160°F
to 230°F). By the way, this is
an AFTER check in the -10
TM’s PMCS.
•
the engine running
•
the transmission in neutral
•
the truck parked on a level
surface.
The oil level should be
between the HOT ADD and
HOT FULL lines. Add oil as
necessary if the level is below
HOT ADD. If it’s above HOT
FULL, call in your mechanic.
PS 629
APR 05
5
T
he FMTV manufacturer, Stewart &
Stevenson, has extended the warranty for
the intermediate input seal on all 5-ton
FMTV vehicles with serial numbers
11438 thru 20216.
For the lowdown on the extended war-
ranty, have your local warranty coordina-
tor call (800) 221-3688, or fill out DA
Form 2407 by email and send it to one of
the following:
m.esker@ssss.com
m.scott@ssss.com
l.hilzendager@ssss.com
PS 629
APR 05
4
FMTV…
Nothing
else works
right, and
anything
else
voids
the
warranty!
Component List for M1089A1 Wrecker
The component list for the FMTV M1089A1 wrecker can be found on the Interactive Electronic
Technical Manual EM 0195. The IETM must be installed on a SPORT or MSD computer to be
used. The SPORT/MSD computers interface with vehicle on-board diagnostic systems.
The following info is needed
on the form:
•
vehicle serial number
•
vehicle mileage
•
defective component part number
•
description of the defect
•
component serial number or
date code
•
quantity
•
telephone number
•
fax number
•
shipping address
good
news!
it’s
still under
warranty!
hmmm…
looks like
we’ll have
to replace
your inter-
mediate
input seal.
Here’s a
hot
pm tip
to keep
my transmission
in good shape
for hot weather
driving!
The
only oil
to use in an FMTV
transmission is
OE/HDO-15W40.
629.04-05(C)
2/21/05
4:21 PM
Page 1
Click here for a copy of this article to save or email
Click here for a copy of these articles to save or email