PS Magazine - TB 43-PS-699

PS, The Preventative Maintenance Monthly

ISSUE 699

FEBRUARY 2011
PS Magazine - TB 43-PS-699 - Page 26 of 33
48
PS 699
FEB 11
49
PS 699
175B Scoop Loader Gasket
NSN 5330-01-088-5984 gets the gasket for the access cover on the scoop loader’s flywheel
housing. It replaces NSN 5330-00-745-7732, which is shown as Item 4 in Fig 9 of TM 5-3805-
257-24P (Oct 93). This gasket is also used for the filter housing on the engine’s ventilating
system (Item 2 in Fig 27) and the generator assembly (Item 18 in Fig 58) of the same TM.
B
efore you ship or transport cargo, you may want to strap and seal it for protection.
That’s when these strapping and sealing kits come in handy. If you don’t need the
whole outft, you can order components. Kits and components are available From the
General Services Administration (GSA).
Stow all tiedown chain assemblies in the railcar’s platForm anchor channels.
Or move them to the center oF the platForm beFore any vehicles drive on or oFF
the railcar.
When stowed, tiedown assemblies don’t get run over and damaged by
heavy equipment. And people won’t trip over the assemblies and Fall oFF the
railcar’s platform.
NSN
Qty
Item
Sealer
Stretcher
Box
Seals,
3
/
8
inch
Strapping,
3
/
8
inch
1
1
1
5,000
100-lb
coil
NSN
Qty
Item
Sealer
Stretcher
Box
Seals,
1
/
2
inch
Strapping,
1
/
2
inch
1
1
1
5,000
100-lb
coil
Stow the Tiedown Assemblies!
Railcars…
Stow the Tiedown Assemblies!
RIGHT!
WRONG!
army railcar
personnel need to
remember to do a
little housekeeping on
railcar platforms.
hey…
where’s
riley?
699.48-49.indd
1-2
12/20/10
3:25 PM
Click here for a copy of these articles to save or email.
Click here for a copy of this article to save or email.
Back to Top
Back to Top