PS Magazine - TB 43-PS-711

PS, The Preventative Maintenance Monthly

ISSUE 711

FEBRUARY 2012

PS Magazine - TB 43-PS-711 - Page 12 of 33
20
PS 711
FEB 12
21
PS 711
FEB 12
1.±Loosen±the±upper±hose±for±each±forward±lift±cylinder.±
You’ll±need±to±use±two±wrenches±at±the±same±time±
to±keep±from±twisting±the±hose±as±you±loosen±the±
connection.±It±takes±a±1
1
/
4
-in±and±a±1
3
/
16
-in±open-end±
wrench±to±loosen±the±connection.
2.±Get±a±buddy±to±hold±the±hose±about±an±inch±away±from±
the±steel±lines±while±you±retighten±the±connection.
M
echanics, aircraft corrosion treatment to protect aluminum is an ever changing,
never-ending job as product improvements remain ongoing.
If you’ve been using the current Alodine Touch-N-Prep 1132 pens, NSN 8030-01-
460-0246, you know they save time and easily apply corrosion treatment.
If
your
requisitions
are
being
cancelled
through
the
supply
system,
or
through
GSA, it’s because there is a
more environmentally-friendly
version available. The 1132 pens
contain hexavalent chromium, a
dangerous carcinogen.
Here’s the big question a lot
of people are asking: Is there a
replacement corrosion pen to do
touch-up corrosion treatment?
The answer is yes. The AMCOM
corrosion team says you can
order the replacement Alodine
Touch-N-Prep 871 pen using
NSN 8030-01-560-9113. These
pens use trivalent chromium,
which is safer to use.
Make a note until each aircraft’s Expendable and Durable Items List is updated in
the next change.
As always, when you are applying corrosion treatment, don’t forget to wear your
personal protective equipment (PPE).
If you have questions, call the AMCOM Corrosion Center of Excellence Hotline,
(256) 313-0209, DSN 897-0209 or toll free at (866) 222-2364.
MW24C±Scoop±Loader…
N
i
p H
o
s
e
R
U
b
i
n t
h
e B
u
d
All±Aircraft…
Protecting
Aircraft
From
paint any bare spots
on the steel lines.
but if a hose has
worn through
its outer
cover,
replace it!
to
prevent
hose damage,
reposition each
one so that it’s
about an inch away
from the steel
line. here’s how…
the scoop loader’s
lift cylinder
hydraulic hoses rub
against the steel
lines to the bucket
clam cylinders.
as the wear increases,
the hoses
weaken
and
burst.
Use±2±wrenches±to±loosen±or±tighten±hoses
Hose±
worn±
through±
to±steel±
braid±
can±rust±
and±
burst
Do±
not
±use±Alodine±1132±pen±for±corrosion±touch±up…
…instead±use±Alodine±871±pen
I got this pen
to help protect
you from
corrosion!
you’d better check
which NSN got you
that pen!
or
you
might
suFfer!
COVER
ME BOYS!
I’M GOiNG
iN!!
711 20-21.indd
1-2
12/22/11
11:10 AM
Click here for a copy of this article to save or email.
Click here for a copy of this article to save or email.


Back to Top
Back to Top