PS Magazine - TB 43-PS-714

PS, The Preventative Maintenance Monthly

ISSUE 714

MAY 2012

PS Magazine - TB 43-PS-714 - Page 9 of 33
14
PS 714
MAY 12
15
PS 714
MAY 12
Up-armored HMMWV VEE/IVEE
Windshield Washer Nozzle
Need the NSN for the windshield washer nozzle on your up-armored ECV HMMWVs with
VEE and IVEE windshields?
TM 9-2320-387-24P lists NSN 2540-
01-436-4236, but that nozzle only works on HMMWVs without the egress windshield.
D
rip pans that really work well come with NSN 4940-01-535-7654. That’s because
they are fexible and can interlock. They are so durable, they can survive being run
over by a heavy vehicle! Plus, they’re good For big systems.
The interlocking containment
pan is made up oF 36-x36-x2-in
squares with interlocking sides
that allow you to make the overall
pan in diFFerent shapes and as
large or as small as you need.
When you place your order, you’ll get a pack oF 10 pans.
Class IX Safety Glasses
Mechanics will probably click Like on Facebook if they see a good pair of safety glasses.
They’re easier to wear than safety goggles, but they can get scratched up a lot. So if you
need to order more class IX safety glasses for the wrench turners in your unit, use NSN
4240-00-990-8905. However, these glasses
do not
substitute for ballistic eyewear.
so when entering through the hatch,
lower your feet
slowly
to the seat,
and then place them on the floor.
don’t
jump!
Tactical
Vehicles…
Dream
Pans
M1117 ASV…
Go
Easy
on the Seat!
when you
have on
full battle
rattle,
it’s easier
to enter
your asv by
jumping on
the seat.
if you do, the
burst disc
may
rupture.
Then
the seats
won’t
adjust. And if
you can’t adjust
the seats,
you can’t operate
the vehicle!
remember
to go
easy
on the seat.
wait,
what?!
and
how!
Interlock pans to make size you need
I must be dreaming!
these interlocking
containment pans are
just what I’ve been
looking for!
but
don’t
jump
on the
seat!
Opening the
seat actuator
bypass valve
also helps
protect
the
burst disc.
Because the bypass
valve is left open
when you exit the
vehicle, you’ll need
to
close
it when
you re-enter the
vehicle. Then put
the seat where you
want it.
The seat actuator
bypass valves are
located on the
left
and
right
sides of
the seat stanchion.
what if
I
already
turned
my engine
off?
That’s why you
should lower
the seat and
open the valve
while exiting
your ASV.
it’s OK—You
can
still
lower the
seat and open
the valve.
714 14-15.indd
1-2
3/22/12
5:03 PM
Click here for a copy of these articles to save or email.
Click here for a copy of this article to save or email.


Back to Top
Back to Top