PS Magazine - TB 43-PS-728

PS, The Preventative Maintenance Monthly

ISSUE 728

JULY 2013

PS Magazine - TB 43-PS-728 - Page 20 of 33
37
PS 728
JUL 13
R
ecently there have been several instances on fring ranges oF M240 machine guns
(particularly the M240L) malFunctioning.
Investigation showed these causes:
•±dirty±weapons
•±lack±of±lubrication
±our simple letters could have prevented most oF these problems:
PMCS.
BEFORE PMCS:
Clean
and lube the M240 like TM
9-1005-313-10 says. Do this
even iF the weapon is newly
issued. Look For damaged
or missing parts. Make sure
you have all the basic issue
items (BII) and components
oF end item (COEI) you’ll
need in the feld, particularly
the spare barrel, the -10,
lubricants
and
cleaning
materials.
DURING PMCS:
Rotate
the barrels every 10 minutes
during
sustained
fre
and
every 2 minutes during rapid
fre. IF the M240 starts fring
sluggishly, stop and clean it.
AFTER PMCS:
Clean and
lube the M240 beFore it goes
in the arms room For storage.
Pay special attention to the gas
regulator and gas ports, which
tend to gunk up with carbon.
Use training time to go
over the cleaning and lubing
procedures in the -10 and
the procedures in the Service
Upon Receipt oF Materiel in
the -23&P.
Remember
those
Four
letters–PMCS–and your fring
problems will go up in smoke.
Dear Half-Mast,
We are trying to
order a canvas cover
for our M66 ring mount,
but can’t find the NSN
for one. Can you help?
CW2 P.R.
Dear Chief P.R.,
Certainly. Order an M66 cover with NSN 1005-
00-707-0725. It costs around $275. You can also
now order a plastic “shower cap” cover with NSN
1005-01-610-9108 for around $300.
•±rusty±barrels
•±firing±again±and±again±without±switching±barrels
M240-Series Machine Guns…
PMCS Is Path to Good Firing
Machine Gun Mounts…
What is M66 Cover NSN?
I could
really use
a canvas
cover.
if we’re going to the
field, I need cleaning
and lubing first!
no more
firing
please!
I realLy need
some preventive
maintenance!
that was a
good trip to
the range.
but before I go
back to the arms
room, I need cleaning
and lubing again.
don’t
forget my
gas ports.
they
usually
plug Up.
hey, I’ve been firing
for 10 minutes!
better
change
my barrel!!
and don’t forget
my spare barrel!
if only my
crew knew
the cover’s
nsn.
no worries, pal! I’ve
got you covered.
whoopee!
728 36-37.indd
1-2
5/20/13
5:42 PM
Click here for a copy of these articles to save or email.


Back to Top
Back to Top