HALDEX-L31204
HALDEX M939 INFOCENTER
HAND-HELD DIAGNOSTIC TOOL; INSTRUCTION MANUAL
NOVEMBER 2003
HALDEX-L31204 - Page 3 of 10
Power Up Information
all Segment Display Test
Sensor/Valve Configuration
2S2C C1= (2Sensors/2 Valves)
Powers up to an 07 code,
Vehicle is Stationary. ABS is
or Powers up to a Fault Code,
the display will power up
to the Active Fault Code.
If COMFAIL is displayed, communication
1
fully operational. If vehicle ABS
Lamp is still On, check stored
faults. (see page 2).
(see pages 5-7 for complete fault code list).
The first screen displays an
Next screen displays ABS
(See pages 5-7 for a complete fault code list).
failure between ECU and the INFOCENTER.
Check connection at diagnostic plug for damage
Back to Top
