LO-5-5420-202-13
M48A5 TANK CHASSIS AND M60A1 TANK CHASSIS
LUBRICATION ORDER
JANUARY 2011
LO-5-5420-202-13 - Page 19 of 28
LO 5-5420-202-13
Card 19 of 22
NOTES:
CAUTION
Optic components of periscope and night viewer may be damaged by
lubricating oil. Use care when lubricating periscope or night viewer
covers to prevent oil from being applied to optical surfaces. Failure to
comply may result in equipment damage.
14. OIL CAN POINTS. Quarterly, lubricate the following items:
•
Headlight removal nuts
•
Fender stowage box hatches and hinges
•
Towing hooks (hinge pin)
•
Brake linkage
•
Transmission support guide rails and rollers
•
Driver’s escape hatch late model (clean and coat pins, plungers, and
all unpainted surfaces)
•
Grille door hinges
•
Control rod clevises
•
Driver's and commander’s seat moving parts
•
Hatch locks and hinges
•
Universal joints
15. Do not lubricate the following items:
•
Starter solenoid
•
Air cleaner blower motor
•
Hydraulic powerpack electric motor
•
Heater motor
•
Ventilator blower motor
•
Gas particulate fan motor
•
Tracks
•
Tachometer drive adapter
•
Any item not pointed out in this lubrication order
16. PUMP DRIVE SHAFT UNIVERSAL JOINTS. Remove access cover. If any lubrication fitting
hole is plugged, remove plug and install lubrication fitting. Do not remove fittings after
lubricating.
Back to Top
