LO-9-2320-260-12

TRUCK, CHASSIS: 5-TON, 6X6, M809 SERIES

LUBRICATION ORDER

NOVEMBER 1983

  LO-9-2320-260-12 - Page 2 of 33

—KEY—
EXPECTED TEMPERATURES
LUBRICANTS
CAPACITIES
Above 15°F
+40° to - 15°F
INTERVALS
+40° to -65°F
(Above -9°C)
(+4° to -26°C)
(+4° to -54°C)
OE/HDO-LUBRICATING OIL,
OC-On condition
INTERNAL COM-
(AOAP)
BUSTION ENGINE
(MIL-1-2104)
C/MR-Change gear
lubricant only when
OEA-LUBRICATING OIL,
required by mainte-
INTERNAL COM-
nance repair action,
BUSTION ENGINE
or if contaminated
(ARCTIC)
by water or other
(MI L-1-46 167)
foreign materials,
OIL CAN POINTS
OE/HDO 30
OE/HDO 10*
OEA
D-
Daily
CRANKCASE:
OE/HDO 30
OE/HDO 10*
OEA
W- Weekly, as
required, de-
W/FILTER
27 qts.
(25.5 l)
pending upon
use; otherwise,
W/O FILTER
23 qts.
during lNTER-
(21.8 l)
VAL 3
STEERING AND
1-
1,000 miles**
HYDRAULIC SYSTEMS:
(1,600 km)
(INCLUDING STEER-
3-
ING GEAR BOX)
3,000 miles
(4,800 km) or
STEERING SYSTEM
5 qts.
OE/HDO 10°
OE/HDO 10°
OEA
3 months,
RESERVOIR
(4.7 l
whichever
occurs first
3/S- 3,000 miles
(4,800 km) or
DUMP BODY
37 qts.
OE/HDO 10*
OE/HDO 10*
OEA
semiannually,
HYDRAULIC
whichever
(35 l)
RESERVOIR
occurs first
CRANE HYDRAULIC
60 gal,
OE/HDO 10*
OE/HDO 10*
OEA
6-
6,000 miles
TANK (M816)
(227 l)
(9,600 km) or
6 months,
CRANE HYDRAULIC
33 gal.
OE/HDO 10*
OE/HDO 10*
OEA
whichever
TANK (M819)
(125 l)
occurs first
12- 12,000 miles
(19,000 km) or
12 months,
GO-LUBRICATING OIL,
whichever
GEAR MULTIPURPOSE
occurs first
(MIL-L-2105)
S-
semiannually
TRANSMISSION
9 qts.
GO 80/90
GO 80/90
GO 75
(6 months)
(8.5 l)
A-
Annually
W/PTO
11 qts.
(12 months)
(10.4 l)
DIFFERENTIAL
12 qts.
GO 80/90
GO 80/90
GO 75
(3)
(11,4 l)
TRANSFER CASE
5.25 qts.
GO 80/90
GO 80/90
GO 75
(5 l)
MIDSHIP WINCH
1.75 pts.
GO 80/90
GO 80/90
GO 75
END FRAME HOUSING
(.83 l)
MIDSHIP WINCH
2.6 pts.
GO 80/90
GO 80/90
GO 75
GEAR CASE
(1.2 l)
FRONT WINCH
2.6 pts.
GO 80/90
GO 80/90
GO 75
GEAR CASE
(1.2 l)
REAR WINCH
3 pts.
GO 80/90
GO 80/90
GO 75
GEAR CASE
(1.4 l)
‘ If OEA lubricant is required to meet the temperature ranges prescribed in the KEY, then the OEA lubricant is to
be used in place of OE/HDO 10 lubricant for all temperature ranges.
“ See note 1.
TA 255943
LO 9-2320-260-12
PAGE 2 OF 31


Back to Top