LO-9-2320-355-20
HIAB MODEL 8108 MEDIUM MATERIAL HANDLING CRANE (MHC) FOR M985E1 CARGO, 8X8 HEAVY EXPANDED MOBILITY TACTICAL TRUCK (HEMTT)
LUBRICATION ORDER
OCTOBER 1986
LO-9-2320-355-20 - Page 9 of 11
NOTES:
1. FOR OPERATION OF EQUIPMENT IN
PROTRACTED COLD TEMPERATURES
BELOW-10°F (-23°C). Remove lubri-
cants prescribed in the key for temper-
atures above -10°F (-23°C) and refill with
lubricant specified for the range of + 40° F
(4°C) to -65°F (-54°C).
2. HOIST ASSEMBLY. Unwind cable from
hoist to expose drain plug and drain the
hoist. Fill with 1 quart (0.95L) of GO to
level of plug.
3. HYDRAULIC FILTERS. Change filter
every 2200 hours or semiannually.
Remove filter element, clean filter
housing, and install new filter element
and packing. Operate crane and check
for leaks.
By Order of the Secretary of the Army
Official:
4. GRADE 85W-140 (GO 85/140) maybe
used when expected temperatures are
above +10°F (-12°C). NATO code for GO
85/140 is 0-228.
Copy of this Lubrication Order will remain
with the equipment at all times; instructions
contained herein are mandatory.
JOHN
A.
WICKHAM, JR.
General United States Army
Chief of Staff
R.L. DILWORTH
Brigadier General United States Army
The Adjutant General
Distribution
To be distributed in accordance with DA Form 12-38, organizational Maintenance requirements for
Truck Cargo, 10-Ton, 8x8, Heavy Expanded Mobility Tactical Truck HEMTT Controls and Equipment
for M985E1 only.
TA320130
LO 9-2320-355-20
CARD 9 OF 9
*U.S. GOVERNMENT PRINTING OFFICE: 1986-490-998/40330
Back to Top
