LO-9-2350-266-12
CARRIER, PERSONNEL, FULL TRACKED, ARMORED FIRE SUPPORT, M981
LUBRICATION ORDER
MARCH 1990
LO-9-2350-266-12 - Page 24 of 48
LUBRICATION ORDER
LO 9-2350-266-12
19 March 1990
Supersedes LO 9-2350-266-12, dated 10 April 85.
CARRIER, PERSONNEL, FULL TRACKED,
ARMOREO FIRE SUPPORT,
M981 (NSN 2350-01-085-3792)
References: TM 9-2350-266-10, TM 9-2350-266-20, TM 9-2350-261-20, TB 43-0210, and CL9100SL
WARNING
Dry cleaning solvent burns easily, can cause skin rash, and can give off harmful
vapors. To avoid injury, keep away from open fire and use in well-ventilated area.
Wear protective clothing and rubber gloves.
CAUTION
DO NOT use compressed air to dry filter. Damage will result.
DO NOT mix hydraulic fluid types. Damage to the hydraulic system may result.
c. Disconnect hose at filter adapter elbow. Remove four machine bolts and key washers
that secure filter to tank. Discard key washers. Remove filter from adapter and wash
thoroughly in dry cleaning solvent P-D-680.
d. Remove breather and wash thoroughly in dry cleaning solvent P-D-680 (TM
9-2350-261-20-2).
e. Clean interior of tank through filter opening using dry cleaning solvent P-D-680 and
clean cloth. Discard packing.
f. Install new packing and filter on adapter. Secure adapter to tank with four new key
washers and four machine bolts. Connect hose to adapter elbow.
g. FiII tank with fluid (OHA, FRH, or OHT) (2 quarts) to bring level between MAX and MIN
marks.
h. Install breather into fill plug. Install fill plug and new packing into tank (TM
9-2350-261-20-2).
i. Operate ramp and check for leaks.
Card 27/(28 blank) of 51/(52 blank)
Back to Top
