MWO-9-2320-272-20-5
MODIFICATION OF 5-TON M939 AND M939A1 SERIES TRUCKS
FRONT LIFTING PIN AND SHACKLE KIT; MODIFICATION WORK ORDER
FEBRUARY 1996
MWO-9-2320-272-20-5 - Page 3 of 10
MWO 9-2320-272-20-5
6.
APPLICATION.
a.
Time compliance schedule MWO effective date Is 1 February 1996 and completion date is 31 January 2000
b.
The lowest level of maintenance authorized to apply the MWO is unit maintenance
c.
Work force and man-hour requirements for application of the MWO to a single unit, end item, or system are as
follows
REQUIREMENTS
WORK FORCE/SKILLS
MAN-HOURS
1 Wheeled Vehicle Mechanic
1 0
(MOS 63B) or equivalent
Total man-hours required for a single application of this MWO is 1 hour
d.
There is no other MWO that must be applied prior to application of this MWO
e.
There is no additional information necessary to apply to this MWO
7.
TECHNICAL PUBUCATIONS AFFECTED/CHANGED AS A RESULT OF THE MWO.
Technical Publication
Date
TM 9-2320-272-10
25 July 1984, w/chg 5, 7 Jun, 1993
TM 9-2320-272-20
25 October 1985, w/chg 3, 25 Mar, 1991
TM 9-2320-272-20P
02 September 1988
TM 9-2320-272-34P-1
12 May 1988
8.
MWO KITS, PARTS, AND THEIR DISPOSITION.
a.
The following kit is required to accomplish this modification The security classification of the kit is unclassified
Shipping data (estimated) are weight 5 lbs; measurements 7 1 x 5 3 x 4 0 inches, volume 0 087 cu ft.
NSN
NOMENCLATURE
CAGEC
PART NO.
Front Lifting Pin and Shackle Kit
19207
12432386
b.
The Front Lifting Pin and Shackle Kit component parts are listed below.
This listing is used to
inventory the kit for completeness
NSN
NOMENCLATURE
CAGEC
PART NO.
QTY
Shackle, Lifting
19207
12301040
2
Pin and Chain Assembly
19207
12375352
2
c.
No bulk or expendable materials are required to apply the Front Lifting Pin and Shackle Kit.
d.
Part Disposition All parts not used during installation of the kit will be returned to stock for disposition in
accordance with AR 725-50
3
Back to Top
