MWO-9-2320-279-20-4
MODIFICATION OF M977 SERIES 8X8 HEAVY EXPANDED MOBILITY TACTICAL TRUCK (HEMTT)
MODIFICATION WORK ORDER; INSTALLATION OF THE ARMY OIL ANALYSIS PROGRAM (AOAP) VALVES
SEPTEMBER 1993
MWO-9-2320-279-20-4 - Page 4 of 10
MWO 9-2320-279-20-4
Figure 2.
Engine Oil Sampling Valve Installation.
NOTE
Low-pressure sampling valve has marking M81940/2-1 permanently marked on it.
(3)
Apply antiseizing tape and install elbow (3) and low-pressure sampling valve (4) in oil sending unit housing.
(4).
Install engine cover side panel and close engine cover.
b.
Transmission Oil Sampling Valve Installation.
Figure 3.
Transmission Solenoid.
(1)
Disconnect hydraulic hose (1) from tee (2) on transmission solenoid (3).
4
Back to Top
