MWO-9-2320-279-20-5
MODIFICATION OF M978 HEAVY EXPANDED MOBILITY TACTICAL TRUCK (HEMTT) TANKER
MODIFICATION WORK ORDER; FRONT TANK VENT TO SAFELY ROUTE VENTED FUEL
APRIL 1993
CHANGE 1
MWO-9-2320-279-20-5 - Page 6 of 10
MWO 9-2320-279-20-5
Figure 4
11.
12.
13.
14.
5.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
Vent Hose (1655630)
Nut
Lock Washer
Screw
Fender
Clip (2288HX)
Stowage Box
Clip (2287HX)
Screw (420AX1)
Lock Washer (351 AX)
Nut (434AX1)
(5)
(6)
(7)
Remove nut (12), Iockwasher (13) and screw (14) from fender (15).
Install vent hose (5) to fender (15) with clip (16) screw (14) Iockwasher (13) and nut (12).
Install vent hose (5) to stowage box (17) with clip (18) screw (19) Iockwasher (20) and nut (21).
Soldier A puts screw (19) through clip (18) and stowage box (17) while soldier B installs Iockwasher (20)
and nut (21).
CALIBRATION REQUIREMENTS.
Not applicable.
WEIGHT AND BALANCE DATA.
Weight and balance are not significantly affected.
QUALITY ASSURANCE REQUIREMENTS.
Not applicable.
RECORDING AND REPORTING OF THE MODIFICATION.
a. Records and Reports: Record the modification in accordance with AR 750-10, DA PAM 738-750, DA
PAM 738-751 and TB 9-1100-803-15.
b. Marking Equipment: Not applicable.
c. Identification Data: Not applicable.
15. PRODUCT IMPROVEMENT PROPOSAL (PIP) NUMBER.
This MWO is authorized by PIP number
1-89-06-4242.
16. MODIFICATION IDENTIFICATION.
Refer to paragraph 10.
5
Back to Top
