MWO-9-2320-279-20-9
MODIFICATION OF M977 SERIES 8X8 HEAVY EXPANDED MOBILITY TACTICAL TRUCK (HEMTT)
MODIFICATION WORK ORDER; INSTALLATION INSTRUCTIONS FOR BOLT TOGETHER WHEELS
DECEMBER 2001
MWO-9-2320-279-20-9 - Page 21 of 29
MWO 9-2320-279-20-9
21
h. Steering System adjustments
NOTE
If you change from Michelin XL or Goodyear AT2A tires, NSN 2610-01-126-1576, to Michelin
XZL tires, NSN 2610-01-334-2694, your steering system will need adjustment.
You can have your Direct Support shop adjust your steering or follow the instructions in steps (13)
thru (17).
Axle stop bolts should be turned in to prevent interference with relief plunger adjustment
Turning plunger counter-clockwise will decrease gap between equalizer beam and tire turning
clockwise will increase gap.
Each time relief plunger is adjusted, wheels must be turned toward
center and then back to stops to
obtain full steering relief. Plunger on bottom of steering gear regulates right turns and plunger on top
regulates left turns.
Back to Top
