SMI-9-2320-387-14P-1
TRUCK, UTILITY: EXPANDED CAPACITY
SUPPLEMENTAL OPERATION, MAINTENANCE, AND REPAIR PARTS INSTRUCTIONS
JULY 2004
SMI-9-2320-387-14P-1 - Page 50 of 671
DRIVER (M1114 AND
M1151 ONLY)
44
Weekly
Body
a.
Inspect cargo shell door
a.
Lift cylinders or
for bends, warping, binding,
latches bent, warped,
and ease of operation. In-
binding, or inopera-
spect latching mechanisms
tive.
for proper operation. Inspect
lift cylinders for bends
and security of mounting.
a.1.
Inspect retaining wire
a.1.
Retaining wire
rope for damage and security
rope is damaged,
of mounting.
missing, or not
secured.
b.
Inspect strap assembly
for frays and security of
mounting.
c.
Check cargo shell door
for alignment as follows:
(1) Insert a piece of paper
between the door seal and
door opening.
(2) With door closed, seal
should offer resistance to
pulling out paper. If door seal
does not offer resistance,
adjustment is required.
d.
Check crew compartment
armor for security of mounting.
e.
Check armor for loose or
missing fasteners. Notify unit
maintenance if any are found.
f.
Check armor components
f.
Armor
for cracks.
components are
cracked.
Table 2-2. Preventive Maintenance Checks and Services (Cont’d).
Item
No.
Interval
Not Fully Mission
Capable If:
Location
Item to
Check/
Service
Crewmember
Procedure
SMI 9-2320-387-14&P-1
2-54
Change 4
Back to Top
