TB-9-2320-279-13-1

TECHNICAL BULLETIN; AIR CONDITIONING SYSTEM

OPERATOR’S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS

DECEMBER 2005

TB-9-2320-279-13-1 - Page 292 of 524

TB 9-2320-279-13-1

0036-2

AC HEATER/EVAPORATOR BLOWER MOTOR RESISTOR HARNESS

REPLACEMENT - Continued

DRAFT

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

2. Remove electrical tape (6) from wire (7) and wire (8).

NOTE

Tag and mark wires and connectors prior to removal to ensure proper installation.

3. Disconnect wire (7) from wire (8).

4. Disconnect connector (9) from resistor (10).

5. Disconnect connector (11) from connector (12).

6. Pull connector (12) through grommet (13) and remove wire harness (14) from vehicle.

HEMAC094

HEMAC095