TB-9-2320-279-13-P-2
TECHNICAL BULLETIN; CREW PROTECTION KIT
OPERATOR’S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS, AND REPAIR PARTS AND SPECIAL TOOLS LISTS (RPSTL)
SEPTEMBER 2005
TB-9-2320-279-13-P-2 - Page 363 of 460
II
106700-7
Rev. -
Page 5
2.
DESCRIPTION AND OPERATION
The physical characteristics of the HEMTT Crew Protection Armor Kit are listed in Table 1.
Table 1.
HEMTT Crew Protection Armor Kit components
Part Description
Part Number
(P/N)
Weight of
Part (lb)
Quantity
Per Vehicle
Total Weight
Per Vehicle (lb)
Windshield Frame
106721-1
123.00
1
123.00
Windshield Assy
113381-1
112.87
2
225.74
Upper Brush Guard
111407-1
131.00
1
131.00
Lower Brush Guard
111496-1
219.00
1
219.00
Louvers
111457-1, -2, -3, -4
149.00
1
149.00
Side Panel Weldment
115506-1, -2
359.55
2
719.10
Door Assy
115512-1, -2
357.00
2
714.00
Roof Armor
106781-3
166.00
1
166.00
Roof Hatch Armor
113342-1
61.00
1
61.00
Cab Rear Armor
106724-3, -4
100.20
2
200.40
Blast Deflector LHS
106717-1
145.00
1
145.00
Blast Deflector RHS
106717-2
145.00
1
145.00
Blast Deflector Center
106715-1
147.00
1
147.00
Upper Brush Guard Shim
106759-1
6.55
1
6.55
Headlight Bracket
111418-1, -2
12.60
2
25.20
Brackets, Mounts, Etc.
MISC.
225.00
1 Lot
225.00
Cover, Upper Brush Guard
111437-1
26.50
1
26.50
Panel Applique Lower
Brush Guard
111426-1
49.90
2
99.80
Total Kit Weight
3,528.29
PARTS TO BE REMOVED
Doors
-
100.00
2
200.00
Brushguard
-
112.00
1
112.00
Rear Windows
-
8.50
2
17.00
Windshield (each)
-
32.10
2
64.20
Total Weight Removed
393.20
TOTAL WEIGHT IMPACT
+3,135.09
2.1
GENERAL
The HEMTT Crew Protection Armor Kit consists of Side Armor (including Armored Doors),
Roof Armor, Transparent Windshield Armor, Three Blast Deflectors, One Upper and One Lower
Brush Guard, Rear Cab Armor Panels, an Armored Louvered Grille Assembly, and an Armored
Escape Hatch.
The Side Armor Attachment Assembly consists of an Armor Panel that is mounted to the vehicle
and is bolted in place.
The Armored Door (which incorporates a sliding armored window) is
bolted to the Side Armor Panel.
The Roof Armor Panel is installed using the existing bolt hole
pattern (used for the Machine Gun Mount) on the roof on the passenger side and the Mounting
Back to Top
