TB-9-2320-279-13-P-3
TECHNICAL BULLETIN; TANKER ARMOR MODULE KIT
OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST AND INSTALLATION INSTRUCTIONS)
JANUARY 2007
TB-9-2320-279-13-P-3 - Page 38 of 396
TB 9-2320-279-13&P-3
0009-2
0009
1
Before
TAM Rear Panel
Assembly
a. Inspect rear armor panel
assembly for damage or loose
or missing mounting
hardware.
Any rear armor panel
assembly is damaged or loose
or mounting hardware is loose
or missing.
b. Inspect rear armor door
assemblies for damage or
loose or missing mounting
hardware.
Any rear armor door assembly
is damaged or loose or
mounting hardware is loose or
missing.
c. Inspect rear armor door
rubber stops for damage or
loose or missing mounting
hardware.
Any rear armor door rubber
stop is damaged, loose or
mounting hardware is loose or
missing.
d. Inspect rear armor door hasps
for damage or loose or
missing mounting hardware.
Any rear armor door hasp is
damaged, loose or mounting
hardware is loose or missing.
e. Inspect rear access door
latches for damage or loose or
missing mounting hardware.
Any rear armor door latch or
component is damaged or
loose or mounting hardware is
loose or missing.
f. Inspect rear light bar for
damage or loose or missing
mounting hardware.
Any rear light bar or
component is damaged or
loose or mounting hardware is
loose or missing.
g. Inspect rear armor door hold
back assemblies for proper
cleanliness, lubrication, and
function. Inspect rear armor
door hold back assembly for
damage or loose or missing
mounting harware. If dirty,
clean and lubricate hold back
assembly springs (WP 0013).
Any rear armor hold back
assembly is damaged or does
not function. Any rear armor
hold back assembly is
damaged, loose or mounting
hardware is loose or missing.
Table 1. Preventive Maintenance Checks and Services. (Continued)
ITEM
NO.
INTERVAL
ITEM TO BE
CHECKED OR
SERVICED
CREWMEMBER PROCEDURE
NOT FULLY MISSION
CAPABLE IF:
Back to Top
