TB-9-2320-279-13-P-3
TECHNICAL BULLETIN; TANKER ARMOR MODULE KIT
OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST AND INSTALLATION INSTRUCTIONS)
JANUARY 2007
TB-9-2320-279-13-P-3 - Page 57 of 396
TB 9-2320-279-13&P-3
0013-3/(4 blank)
0013
INSTALLATION
NOTE
NOTE
Both right rear door check and hold back assembly and left rear door check and hold back
assembly are installed the same way. Right rear door check and hold back assembly shown.
1. Install door check and hold back assembly (3) to rear panel assembly (9) with two locknuts (8),
washers (7), and screws (6).
2. Install door check and hold back assembly (3) and door stop bracket (4) to rear door assembly (5) with
two lockwashers (2) and screws (1).
3. Apply light coat of grease to springs (10) on door check and hold back assembly (3).
END OF TASK
FOLLOW-ON MAINTENANCE
1. Connect batteries (TM 9-2320-279-20).
2. Remove wheel chocks (TM 9-2320-279-10).
END OF TASK
END OF WORK PACKAGE
Back to Top
