TB-9-2320-279-13-P-3
TECHNICAL BULLETIN; TANKER ARMOR MODULE KIT
OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST AND INSTALLATION INSTRUCTIONS)
JANUARY 2007
TB-9-2320-279-13-P-3 - Page 72 of 396
TB 9-2320-279-13&P-3
0016-2
0016
REMOVAL
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure that any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure to
follow this warning may cause injury or death to personnel.
NOTE
NOTE
Rear panel assembly weighs 220 lb (100 kg).
1. Attach sling and lifting device to rear panel assembly (1).
2. Remove screw (2), two washers (3), and one locknut (4) from rear panel assembly (1). Discard locknut.
3. Remove four screws (5), lockwashers (6), washers (7), one ground strap (8), and rear panel assembly (1)
from two rear panel assembly attach bars (9). Discard lockwashers.
END OF TASK
Back to Top
