TB-9-2320-279-13-P-4

TRUCK, TRACTOR, LIGHT EQUIPMENT TRANSPORTER (LET), 8X8, M983A2 LET

TECHNICAL BULLETIN; OPERATOR AND FIELD LEVEL

APRIL 2008
TB-9-2320-279-13-P-4

  TB-9-2320-279-13-P-4 - Page 113 of 744

OPERATOR MAINTENANCE
CONNECT/DISCONNECT M870A3 SEMITRAILER
INITIAL SETUP:
Not Applicable
CONNECT M870A3 SEMITRAILER
CAUTION
•
The following are general procedures for connecting the M870A3 semitrailer to a tractor vehicle.
Always refer to TM 5-2330-325-14&P for specific instructions with regard to operating the
semitrailer. Failure to comply may result in damage to equipment.
•
Lockouts must be positioned as identified in Table 1. Failure to comply may result in damage
to equipment.
NOTE
•
This procedure is a two soldier task.
•
Tractor vehicle is equipped with fifth wheel to accept 3.5 in. (89 mm) kingpin.
•
If fifth wheel lockouts are NOT positioned correctly, complete Steps (1) and (2).
•
If fifth wheel lockouts are positioned in the correct mode, skip to Step (3).
1. Refer to Table 1 to determine whether lockout assembly lockrings are in correct position.
TB 9-2320-279-13&P-4
0013
0013-1


Back to Top