TB-9-2320-279-13-P-4

TRUCK, TRACTOR, LIGHT EQUIPMENT TRANSPORTER (LET), 8X8, M983A2 LET

TECHNICAL BULLETIN; OPERATOR AND FIELD LEVEL

APRIL 2008

TB-9-2320-279-13-P-4 - Page 136 of 744

13

12

8

11

10

Figure 5.

12. Connect remote-control unit cable plug (11) to remote-control unit hookup receptacle (10).

13. Clean any dirt and debris from both remote-control unit receptacle (12) and remote-control unit cable plug (13).

14. Connect remote-control unit cable plug (13) to remote-control unit receptacle (12).

PAY OUT CABLE AND CONNECT TO EQUIPMENT

CAUTION

•

Do not allow other vehicles to run over winch cable. Winch cable may be damaged.

Failure to comply may result in damage to equipment.

•

Cable Hold Down control should never be engaged (pushed in) during winch cable pay

out under power. Failure to comply may result in damage to equipment.

1. Disengage (pull out) Cable Hold Down control (1).

TB 9-2320-279-13&P-4

0014

0014-4