TB-9-2320-279-13-P-4

TRUCK, TRACTOR, LIGHT EQUIPMENT TRANSPORTER (LET), 8X8, M983A2 LET

TECHNICAL BULLETIN; OPERATOR AND FIELD LEVEL

APRIL 2008
TB-9-2320-279-13-P-4

  TB-9-2320-279-13-P-4 - Page 183 of 744

OPERATOR MAINTENANCE
HEAVY-DUTY WINCH WILL NOT OPERATE IN REMOTE CONTROL
INITIAL SETUP:
Equipment Condition
Engine shut down. (TM 9-2320-279-10)
Parking brakes applied. (TM 9-2320-279-10)
Wheels chocked. (TM 9-2320-279-10)
TROUBLESHOOTING PROCEDURE
HEAVY-DUTY WINCH WILL NOT OPERATE IN REMOTE CONTROL
TEST 1 - Does winch operate in and out with manual control?
1. Pull selector valve out. (WP 0015)
2. Push WINCH KICKOUT control valve in to ENGAGE position. (WP 0015)
WARNING
Excessive noise levels are present any time the heavy-duty winch, crane, or retrieval system
is operating. Wear single hearing protection (earplugs or equivalent) while working around
equipment when it is running. Failure to comply may result in injury or death to personnel.
Seek medical aid should you suspect a hearing problem.
3. Start engine (refer to TM 9-2320-279-10).
4. Set PTO ENGAGE switch to ON. (WP 0015)
TB 9-2320-279-13&P-4
0021
0021-1


Back to Top