TB-9-2320-279-13-P-4

TRUCK, TRACTOR, LIGHT EQUIPMENT TRANSPORTER (LET), 8X8, M983A2 LET

TECHNICAL BULLETIN; OPERATOR AND FIELD LEVEL

APRIL 2008

TB-9-2320-279-13-P-4 - Page 290 of 744

TUBE

FITTING

TUBE

FITTING

HOSE

2901

HOSE

2900

Figure 1.

2. Disconnect hydraulic hoses 2900 and 2901 from heavy-duty winch. Refer to schematics. (WP 0069)

3. Install hydraulic flow tester inlet hose to hydraulic hose 2901.

4. Install hydraulic flow tester output hose to hydraulic hose 2900.

5. Pull selector valve out. (WP 0015)

WARNING

Excessive noise levels are present any time the heavy-duty winch, crane, or retrieval system

is operating. Wear single hearing protection (earplugs or equivalent) while working around

equipment when it is running. Failure to comply may result in injury or death to personnel.

Seek medical aid should you suspect a hearing problem.

6. Start engine (refer to TM 9-2320-279-10).

7. Set PTO ENGAGE switch to ON position. (WP 0015)

TB 9-2320-279-13&P-4

0030

0030-2