TB-9-2320-279-13-P-4
TRUCK, TRACTOR, LIGHT EQUIPMENT TRANSPORTER (LET), 8X8, M983A2 LET
TECHNICAL BULLETIN; OPERATOR AND FIELD LEVEL
APRIL 2008
TB-9-2320-279-13-P-4 - Page 303 of 744
•
Never disconnect any high-pressure hydraulic hose, line or component without first dropping
pressure to zero. Failure to comply may result in injury or death to personnel.
•
Wear proper eye protection when working with or performing checks on high-pressure hydraulic
systems. Failure to comply may result in injury or death to personnel.
1. Place suitable drain pan under heavy-duty winch assembly prior to removing hoses.
HOSE
2901
HOSE
2900
HEAV
Y
-DUT
Y
WINCH
Figure 5.
2. Disconnect hydraulic hoses 2900 and 2901 from heavy-duty winch. Cap fittings on winch assembly. Refer to
schematics. (WP 0069)
3. Install hydraulic flow tester inlet hose to hydraulic hose 2901.
TB 9-2320-279-13&P-4
0031
0031-5
Back to Top
