FIELD MAINTENANCE
HEAVY-DUTY WINCH DRIVE MOTOR REMOVAL/INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Bit, Hex, 3/8”, 3/8” DR (WP 0081, Table 2, Item
7)
Cap and Plug Set (WP 0081, Table 2, Item 1)
Lifting Device, Minimum Capacity 300 lbs (136 kg)
Pan, Drain, 4 Gallon (WP 0081, Table 2, Item 3)
Tool Kit, General Mechanic's: Automotive (WP
0081, Table 2, Item 5)
Wrench, Adjustable, 18 inch (WP 0081, Table 2,
Item 6)
Wrench, Torque, Click, Ratcheting, 3/8 inch Drive,
250 ft-lb (WP 0081, Table 2, Item 6)
Goggles, Industrial (WP 0081, Table 2, Item 7)
Materials/Parts
Cable Ties, Plastic (WP 0083, Table 1, Item 1)
Oil, Lubricating (WP 0083, Table 1, Item 25, 26, 27,
28)
Tags, Identification (WP 0083, Table 1, Item 30)
Packing, Preformed (WP 0084, Table 1, Item 28)
Qty: 1
Packing, Preformed (WP 0084, Table 1, Item 20)
Qty: 1
Lockwasher (WP 0084, Table 1, Item 14) Qty: 8
Packing, Preformed (WP 0084, Table 1, Item 22)
Qty: 2
Packing, Preformed (WP 0084, Table 1, Item 23)
Qty: 1
Lockwasher (WP 0084) Qty: 4
Gasket (WP 0084, Table 1, Item 1) Qty: 1
Packing, Preformed (WP 0084, Table 1, Item 24)
Qty: 1
Packing, Preformed (WP 0084, Table 1, Item 25)
Qty: 1
Personnel Required
Wheeled Vehicle Mechanic 63B (2)
References
Parts Manual (Fig. 22)
Parts Manual (Fig. 27)
Equipment Condition
Engine OFF (TM 9-2320-279-10).
Wheels chocked (TM 9-2320-279-10).
REMOVAL
WARNING
•
Hydraulic system pressure can exceed 3,000 psi (20 684 kPa). A high-pressure hydraulic
system can pierce a body. Ensure engine if OFF prior to disconnecting hydraulic hoses. Failure
to comply may result in injury or death to personnel.
•
Never disconnect any high-pressure hydraulic hose, line or component without first dropping
pressure to zero. Failure to comply may result in injury or death to personnel.
•
Wear proper eye protection when working with or performing checks on high-pressure hydraulic
systems. Failure to comply may result in injury or death to personnel.
TB 9-2320-279-13&P-4
0068
0068-1