TB-9-2320-280-35-14
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR SINGLE CHANNEL GROUND AND AIRBORNE RADIO SYSTEM (SINCGARS) AN/VRC-88F, AN/VRC-89F, AN/VRC-90F, AN/VRC-91F, AN/VRC-92F
SEPTEMBER 2006
TB-9-2320-280-35-14 - Page 56 of 148
5-34
TB 9-2320-280-35-14
Section XVII.
REAR SINCGARS ANTENNA INSTALLATION
NOTE
This procedure applies to vehicles without existing antennas. For
vehicles with existing antennas, remove all control cables. (Refer
to TM 9-2320-280-20.)
17-1.
Using antenna mounting bracket (3) as template, locate, mark, and drill one 1.375-in. diameter
hole (4) in left rear wall (2).
17-2.
Locate, mark, and drill three 0.343-in. diameter holes (1) in rear wall (2).
17-3.
Remove paint from vicinity of three holes (1) and three matching holes in antenna mounting
bracket (3).
17-4.
Apply anti-seize compound to vicinity of three holes (1) and rear of antenna mounting bracket (3).
Back to Top
