5-10
TB 9-2320-387-35-1
Figure 5-14.
26
6
23
22
22
6-10.
Route 24V power cable (27) through hole (6) and install 24V power cable terminal lug (23) on
inboard stud (22) of terminal board (28). Do not secure 24V power cable terminal lug (23) at this
time.
6-11.
Secure three fuse wires (25) and 24V power cable terminal lug (23) to inboard terminal board
stud (22) with locknut (26).
6-12.
Secure three remaining fuse wires (24) to corresponding studs on 24V terminal board (28) with
three locknuts (26).
24. FUSE WIRE ASSEMBLY (24V) – 12480568-1 – QTY. 3
26. LOCKNUT – 271175 – QTY. 4
27. POWER CABLE ASSEMBLY – 12480567-2 – QTY. 1
25
27
24
28