TB-9-2350-277-40-P-1
CARRIER, MORTAR, 120-MM M121, SELF-PROPELLED M1064A3
TECHNICAL BULLETIN; INSTALLATION OF CREW II MODIFICATION KIT PART 1 OF 4
JUNE 2009
TB-9-2350-277-40-P-1 - Page 81 of 100
TB 9-2350-277-40&P-1
FABRICATED TOOLS
0012 00
0012 00-1/2 blank
SCOPE
This work package includes instructions for making tools authorized to be fabricated at sustainment
level.
These tools are needed for special installation procedures, but are not available in the supply
system.
The tools are normally fabricated locally when required by the task.
FABRICATION ILLUSTRATIONS
The following figure provides tool fabrication instructions.
All parts and bulk materials needed for
manufacturing the tool are listed on each figure.
When needed, any special explanatory instructions
are included in the notes on the figure.
Figure 1.
Magnetic Drill Base Plate/Template
MATERIAL REQUIRED
Steel, Plate, 1 inch Thick
NOTES:
1.
Fabricate as illustrated.
2.
Break all sharp edges and corners.
END OF WORK PACKAGE
Back to Top
