TB-9-2350-368-25
M113A2/M113A3/M548Al/M548A3 FAMILY OF VEHICLES INCLUDING OPPOSING FORCES SURROGATE VEHICLE (OSV)
FABRICATION AND OPERATION OF POWERPLANT TEST STAND
FEBRUARY 2003
TB-9-2350-368-25 - Page 63 of 120
TB 9-2350-368-25
2-49
SECTION VIII. HYDRAULIC SYSTEM
2-8.
HYDRAULIC SYSTEM.
Part and components for the hydraulic system can be fabricated or
purchased from stock.
a. Hydraulic Loop (M113A2/M548A1)
Bill Of Materials
Item
Nomenclature
Part Number
NSN
Qty
1
Coupling half quick disconnect
10865913
2
2
Nipple pipe
Bench stock
1
NOTE
Only the nose piece of the coupling half quick disconnect assembly
(1) is needed.
1. Thread nipple pipe (2) to match the threads of two nose pieces (1).
2. Connect nipple pipe (2) between two nose pieces (1). See Figure 2-29.
Figure 2-29. Hydraulic System Loop Fabrication
SECTION IX. MISCELLANEOUS
2-9.
MISCELLANEOUS.
This section tells you how to make several brackets. Some are very simple and
need no instructions. These will be left up to the maker as to what design and size are needed (if needed at
all).
Bill Of Materials
Item
Nomenclature
Part Number
NSN
Qty
1
Bracket, mild steel
Bench stock
A/R
a. NATO Slave Receptacle Bracket
1. Fabricate NATO slave receptacle bracket from 1/8-inch mild steel stock.
2. Weld NATO slave receptacle bracket to powerplant frame, located at left rear corner.
Back to Top
