TB-9-2350-376-23-1
CARRIER M577A2, M1068, M577A3 AND M1068A3
TECHNICAL BULLETIN; INSTALLATION OF COMPARTMENT HEATER EXHAUST CABLE GUIDE BRACKET MODIFICATION KIT 57K4278
JUNE 2007
TB-9-2350-376-23-1 - Page 9 of 28
TB 9-2350-376-23-1
REMOVAL PROCEDURES
0002 00
THIS WORK PACKAGE COVERS:
Removal (page 0002 00-1)
INITIAL SETUP
Maintenance Level
Field
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0004 00, Item 1)
Equipment Conditions
Vehicle blocked (TM 9-2350-277-10 or
TM 9-2350-261-10)
REMOVAL
NOTE
The Personnel Heater Assembly does not have to be removed to install the cable
guide bracket.
Heater assembly is not shown for clarity to view the proper
orientation of the wiring harnesses, cables, and leads.
STE-ICE is only on the
M577A3 and M1068A3.
1.
Battery power leads and STE-ICE wiring harness
a.
Remove strap (1), screw (7), lockwasher (6), and clamp (4) from leads and STE-ICE harness (M577A3 and
M1068A3 only) (5), compartment heater ground wire (3), and lockwasher (2). Discard strap, clamp, and
lockwashers.
1
2
3
5
4
5
6
7
M577A3/M1068A3 Shown
0002 00-1
Back to Top
