TM-10-4930-247-13-P
HEMTT TANKER AIRCRAFT REFUELING SYSTEM MODEL HTARS100
TECHNICAL MANUAL; OPERATOR’S, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
FEBRUARY 1994
TM-10-4930-247-13-P - Page 122 of 309
TM 10-4930-247-13&P
4-17.
2-INCH FUEL HOSE ASSEMBLY HOSE REPAIR -cont.
Figure 4-7.
2-Inch Fuel Hose Repair.
c.
Inspection.
Refer to figure 4-7.
(1)
Inspect valved dry break coupling assemblies (4 and 8) for cracks, corrosion and damaged coupling ends.
(2)
Inspect hose (9) for cuts, tears, punctures, bulges and delamination.
(3)
Inspect ends of hose (9) for damaged or missing ground wires.
Perform continuity test of ground wires from one
end of hose to the other.
Continuity must exist.
(4)
Inspect ground wires at both ends of hose (9).
At least 1/2 inch of wire must be exposed.
If required, trim back
hose material to obtain correct wire length.
d.
Repair.
(1)
Replace damaged components and all mandatory replacement parts.
(2)
Repair valved dry break coupling assemblies (para 4-18).
e.
Assembly.
Refer to figure 4-7.
(1)
Slide sleeve (5) onto hose (9) and position it about 12 inches back from end of hose.
(2)
Fold ends of grounding wires into hose (9).
4-27
Back to Top
