TM-10-5411-205-13

SHELTER, ELECTRICAL EQUIPMENT - 250/G

TECHNICAL MANUAL; OPERATOR’S, UNIT, AND DIRECT SUPPORT MAINTENANCE MANUAL

MAY 1995
CHANGE 2
TM-10-5411-205-13

  TM-10-5411-205-13 - Page 103 of 127

TM 10-5411-205-13
4-12.
Surface Preparation, Priming, and Painting.
All bare metal shall be painted to
prevent corrosion. Touch up small dents and chips. Repaired sections of panels must be
prepared with a corrosion-protection primer before painting. Do not attempt to repaint large
areas such as complete exterior, interior, or ceiling. Detailed priming and painting instructions
can be found in TM 43-0139.
4-16


Back to Top