TM-10-5411-233-13-P
CARGO BED COVER (CBC), TYPE III, 2 1/2 T CARGO TRUCK, LMTV, AND LMTV TRAILER
TECHNICAL MANUAL; OPERATOR’S, UNIT, AND DIRECT SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS
SEPTEMBER 2002
TM-10-5411-233-13-P - Page 15 of 356
TM 10-5411-233-13&P
HOW TO USE THIS MANUAL
This Manual contains General Information, Operating Instructions, Operator Preventive Maintenance
Checks and Services (PCMS), Troubleshooting, and Maintenance/Repair instructions for the Cargo Bed
Cover (CBC), Type III 2 1/2 T Cargo Truck, LMTV and LMTV Trailer.
Chapter 1 contains introductory information on the CBC and its associated equipment as well as a Theory
of Operation. Chapter 2 includes operating instructions under usual and unusual conditions. Chapter 3
contents include operator troubleshooting. Chapter 4 contains Operator Maintenance instructions
including PMCS procedures. Chapter 5 contains Unit Maintenance instructions. Chapter 6 contains Direct
Support Maintenance instructions. Chapter 7 contains references and other supporting information.
Chapter 7 also includes the Repair Parts and Special Tools List (RPSTL) which identifies those parts or
tools which are unique to the operation and maintenance of this equipment.
Manual Organization and Page Numbering System.
The Manual is divided into seven major chapters
that detail the topics mentioned above. Within each chapter are work packages covering a wide range of
topics. Each work package is numbered sequentially starting at page 1. The work package has its own
page numbering scheme and is independent of the page numbering used by other work packages.
Each
page of a work package has a page number of the form XXXX YY-ZZ where XXXX is the work package
number (e.g. 0010 is work package 10) and YY is the revision number for that work package and ZZ
represents the number of the page within that work package. A page number such as 0010 00-1/(2 blank)
means that page 1 contains information but page 2 of that work package has been intentionally left blank.
Text and Illustrations.
Descriptive text and procedures are always accompanied by one or more
illustrations. The text or procedure will be annotated with find numbers such as “(1)” that correspond to a
specific callout on the illustration. In this technical manual, the descriptive text or procedure will always
precede the illustration. Therefore, when reading a section in the manual, always look for the
accompanying illustration to follow the section.
Finding Information.
The Table of Contents permits the reader to find information in the manual quickly.
The reader should start here first when looking for a specific topic. The Table of Contents lists the topics
contained within each chapter and the Work Package Sequence Number where it can be found.
Example: If the reader were looking for instructions on “Preventive Maintenance Checks and Services”,
which is an Operator Maintenance topic, the Table of Contents indicates that Operator Maintenance
information can be found in Chapter 4. Scanning down the listings for Chapter 4, “Preventive Maintenance
Checks and Services” information can be found in WP 0012 00 (i.e. Work Package 12).
An Alphabetical Index can be found at the back of the manual, and lists specific topics with the
corresponding work package.
v/(vi Blank)
Back to Top
