TM-10-5411-233-13-P
CARGO BED COVER (CBC), TYPE III, 2 1/2 T CARGO TRUCK, LMTV, AND LMTV TRAILER
TECHNICAL MANUAL; OPERATOR’S, UNIT, AND DIRECT SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS
SEPTEMBER 2002
TM-10-5411-233-13-P - Page 36 of 356
TM 10-5411-233-13&P
CARGO BED COVER (CBC), TYPE III, 2 1/2 T CARGO TRUCK, LMTV, AND LMTV TRAILER
0004 00
CONTROLS, INDICATORS, LABELS AND INSTRUCTION PLATES
WINCH AND LIFTING/LOCKING ASSEMBLIES
Table 2 describes the controls for the Winch and Lifting/Locking Assemblies.
4
8
5
2
1
3
6
7
Table 2. Winch and Lifting/Locking Assemblies Controls
KEY
CONTROL
FUNCTION
1
RATCHET HANDLE
Controls winch assembly and is used to raise and lower
upper expandable section of CBC
2
LIFTING/LOCKING ASSEMBLY HANDLE
Used to lock the Lifting/Locking Assembly in a vertical
position
3
LIFTING/LOCKING ASSEMBLY HANDLE
RELEASE HAIRPIN COTTER
Used to release the handle from the main body tube of
the Lifting/Locking Assembly
4
LIFTING/LOCKING ASSEMBLY STOWAGE
RELEASE HAIRPIN COTTER
Used to lock the Lifting/Locking Assembly in its stowing
position on the roof of the CBC
5
LIFTING/LOCKING ASSEMBLY BASE
PLATE
Engages with the Corner Fitting Pulley Assembly on the
lower section to align the Lifting/Locking
Assembly
6
LIFTING/LOCKING ASSEMBLY BASE
PLATE ALIGNMENT PINS
Engage in the Interlock Extrusion on the lower section of
the CBC to lock and align the Lifiting/Locking Assembly
7
CORNER FITTING PULLEY ASSEMBLY
Engages the base of the Lifting/Locking Assembly to
support and align
8
LIFTING/LOCKING ASSEMBLY ROOF
STOWAGE BLOCK
Provides a docking mechanism for the Lifting/Locking
Assembly when the CBC is in retracted mode
0004 00-2
Back to Top
