TM-3-1040-279-12-P

GENERATOR SET, SMOKE, MECHANICAL: PULSE JET, M157 W/120 GAL FOG OIL TANK AND W/80 GAL FOG OIL TANK

TECHNICAL MANUAL; OPERATOR’S AND ORGANIZATIONAL MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST AND DEPOT MAINTENANCE REPAIR PARTS

MAY 1987

  TM-3-1040-279-12-P - Page 84 of 389

TM 3-1040-279-12&P
Section V. ORGANIZATIONAL MAINTENANCE PROCEDURES
4-9 M157 SMOKE GENERATOR SET.
This task covers painting of smoke generator set and replacement of:
a. Control Panel Assembly
b. Air Compressor Assembly
c. M54 Smoke Generator
d. Fog Oil Tank Assembly
e. Fog Oil Pump Assembly
(P. 4-21)
INITIAL SETUP
Tools
Materials
General Mechanic’s Automotive Tool Kit
SC 5180-90-CL-N26
Paint Brush (Item 2, App E)
Abrasive Cloth (Item 3, App E)
References
TM 3-1040-280-20&P
TM 9-2350-261-20-1
TM 43-0139
Polyurethane Coating (Item 9, App E)
Primer Coating (Item 10, App E)
PAINTING
CAUTION
Do not paint engine head assembly, outlet nozzle assembly, nozzle
assembly, air compressor motor, fog oil pumps, fire detection element, cable
assemblies, fuel hoses, fog oil houses, or air pressure hoses.
1.
Remove burrs, corrosion, and chipped paint.
2.
Touch up outside surfaces of smoke generator set with primer coating and polyurethane coating.
See TM 43-0139.
a. Control Panel Assembly.
b. Air Compressor Assembly.
c. M54 Smoke Generator.
d. Fog Oil Tank Assembly.
REMOVAL/lNSTALLATlON
Refer to TM 9-2350-261-20-1 for equipment mounted on M1059 vehicles or TM 3-1040-280-20&P for
equipment mounted on M1037/M1097 vehicles.
4-20
Change 4


Back to Top