TM-5-2330-325-13-P

SEMITRAILER, MEDIUM HEAVY EQUIPMENT TRANSPORTER (MHET), 40 TON, M870A3

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2014
TM-5-2330-325-13-P

  TM-5-2330-325-13-P - Page 157 of 648

FIELD MAINTENANCE
HUB GENERATES EXCESSIVE HEAT
INITIAL SETUP:
References
WP 0072
TROUBLESHOOTING PROCEDURE
SYMPTOM
HUB GENERATES EXCESSIVE HEAT
MALFUNCTION
HUB IS DAMAGED OR HAS IMPROPER BINDING
CORRECTIVE ACTION
WARNING
Hub may be hot. Before putting hand to hub, hold hand close to hub to check for
excessive heat radiation. This will prevent skin burns caused by hot metal.
Failure to comply may result in death or injury to personnel. Seek medical
attention in the event of an injury.
1.
Inspect hub for damage. If damaged, replace hub (WP 0072).
2.
Inspect hub for improper binding or excessive end play. If binding is improper or hub has
excessive end play, adjust hub and bearings (WP 0072).
MALFUNCTION
BEARINGS ARE WORN OR DAMAGED
CORRECTIVE ACTION
Replace worn or damaged components (WP 0072).
END OF WORK PACKAGE
TM 5-2330-325-13&P
0031
0031-1/blank


Back to Top