TM-5-2350-262-10

ARMORED COMBAT EARTHMOVER (ACE), M9

OPERATOR'S MANUAL

TM-5-2350-262-10 - Page 115 of 302

TM 5-2350-262-10

2-62

Change 5

PALLETIZED CARGO HANDLING -

CONTINUED

LOADING PALLET - CONTINUED

7

Push both suspension control levers (1)

forward, and lower front of vehicle until

scraper cutting edge (2) rests on ground.

8

Attach chain (3) to pallet and to lifting eye

(4) on ejector (5).

WARNING

WARNING

WARNING

WARNING

WARNING

Do not operate ejector when personnel

are in bowl.

Do not work in bowl unless

ejector lock is engaged.

Failure to

comply may result in severe injury to

personnel.

9

Slowly retract ejector (5) until pallet is

pulled into bowl.

If necessary, move

ejector (5) forward, shorten chain (3), and

pull pallet all the way into bowl.

10

Disconnect chain (3) from ejector (5).

Have helper remove two apron lockpins

(6), then raise front of vehicle and lower

apron (7).

Place suspension in SPRUNG

mode.

11

Stow chain (3) on apron (7).