TM-5-2350-262-10
ARMORED COMBAT EARTHMOVER (ACE), M9
OPERATOR'S MANUAL
TM-5-2350-262-10 - Page 129 of 302
TM 5-2350-262-10
2-76
Change 5
6
12
When all but about 3 ft (91 cm) of wire rope
is on drum, disconnect wire rope hook (1)
from lighter vehicle or anchor.
Attach wire
rope hook (1) to hull bracket (2) and pay in
wire rope until slack is removed from wire
rope.
Engage winch stop (3) to winch
control lever (4).
13
Place winch shift lever (5) in LOW (handle
up), making sure lever is firmly seated in the
low range detent (6) of the shift control
assembly.
This will prevent wire rope pay
out when winch is not in use.
14
At earliest opportunity, clean and lubricate
wire rope in accordance with Appendix F.
WINCH OPERATION
5
Back to Top
