TM 5-2350-262-10
2-104
Change 5
FORDING OPERATION
WARNING
WARNING
WARNING
WARNING
WARNING
Do not try to ford when water is more
than 36 in. (91 cm) deep.
Failure to
comply may result in damage to
equipment or injury to personnel.
Note
Ensure drain valve is clear of debris and
closed with a positive seal, prior to
fording operation.
1
Start the engine (p 2-37) and allow it to warm
up for 3 to 5 minutes.
2
Place CB/GS steer selector lever (1) in either
CB or GS position.
Note
If dozing will be performed while fording, fill
bowl with ballast.
Place SPRUNG/
UNSPRUNG control lever in UNSPRUNG.
3
Place SPRUNG/UNSPRUNG control lever (2)
in SPRUNG position.
4
Place transmission shift lever (3) to 1; then
shift to 2 as necessary.
3