TM-5-2350-262-10

ARMORED COMBAT EARTHMOVER (ACE), M9

OPERATOR'S MANUAL

TM-5-2350-262-10 - Page 207 of 302

TM 5-2350-262-10

3-22

Change 5

1

Lift and remove left and right floor plates (1) and (2).

2

Remove two self-locking screws (3) and left floor plate support (4) from rear of vehicle.

3

Reach through opening and clean debris from bilge pump inlet screen (5).

4

Start engine (p 2-37) and remove bilge pump lever to ON (p 2-2).

Using hand, check for air flow

from pump outlet (6).

If no air is expelled, or bilge pump does not operate,

notify unit maintenance.

5

Install left floor plate support (4) with two self-locking screws (3).

6

Install left and center floor plates (1) and (2).

Note

Although the Bilge Pump is considered Not Mission Essential and will no

longer be supported with spare and repair parts, this manual contains

operational procedures For Your Information Only.

Notify Unit maintenance

if the bilge pump no longer operates.