TM 5-2350-262-10
2-24
Change 5
Item
No.
Interval
Location
Item to
Check/
Service
Crewmember
Procedure
Not Mission
Capable if:
26
After
Driver’s
Check driver’s seat adjustment
Seat
for proper operation.
27
After
Transmis-
Put vehicle in neutral and engage
sion, Steer
parking brake.
Unit,
Transfer
Lift out and remove the three rear
Case, and
platform panels.
Final Drive
Oil Levels
Steer unit check must be made
on level ground with the engine
running.
After engine has idled 3 to 5
minutes, remove steer unit
dipstick and check oil level.
Oil
should be in operation range.
`
Add oil if necessary, but do not
overfill.
Move ejector forward and lock
control lever with lock.
SHUT
VEHICLE OFF.
Check final drive level when oil
is hot.
Remove both final drive gauges
and check oil level.
Oil should
be within flat area on gauge.
Add oil as necessary, but do not
overfill.
NOTE
NOTE
NOTE
FINAL
DRIVE
FLANGE
DIPSTICK
Table 2-1.
Preventive Maintenance Checks and Services for M9 ACE - Continued