TM-5-2350-262-20-1
ARMORED COMBAT EARTHMOVER (ACE), M9
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL; VOLUME 1 OF 3
TM-5-2350-262-20-1 - Page 56 of 776
TM 5-2350-262-20-1
Change 3
1-19
HYDRAULIC CONTROL VALVE OPERATION
The hydraulic control valves on the directional control valve bank are
activated by mechanical linkages from the operator’s compartment and they, in turn, activate the hydraulic functions
of the vehicle.
Note
Although the Bilge Pump is considered Not Mission Essential and will no longer be
supported with spare and repair parts, this manual contains troubleshooting and
maintenance procedures For Your Information Only.
See TB 43-0001-62-7 (dated Oct
98) for Instructions to Isolate and disconnect a Non-Functional Bilge Pump.
This page, and pages 1-20 through 1-23, describe the functions of valves and circuits they activate.
Refer to this
page when following the bilge pump, apron raise/lower, winch, and ejector valve circuits.
Back to Top
