TM-5-2350-262-20-2

ARMORED COMBAT EARTHMOVER (ACE), M9

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL; VOLUME 2 OF 3

TM-5-2350-262-20-2 - Page 128 of 670

TM 5-2350-262-20-2

Change 4

4-477 (4-478 through 4-480 Deleted) (4-478 Blank)

(TM 5-2350-262-10).

(TM 5-2350-262-10).

Deleted

Deleted

Deleted

Deleted

Disconnect hose (12) at QD from elbow (13) QD at

filter head (2).

Disconnect hose (11) at QD and from hydraulic test

point fitting (13.1) and disconnect hydraulic test

point (13.1) from elbow (13) QD at filter head (2).

Remove two self-locking nuts (16.1), two screws

(15), two washers (16), and filter head (2) from

driver’s (right side) compartment wall.

Install filter head (2) on driver’s (right side)

compartment wall with two washers (16), two screws

(15), and two self-locking nuts (16.1). Tighten self-

locking nuts (16.1) to 25-30 lb-ft (34-41 N˜m).

Install two packings (14), and elbows (13) on filter

head (2) and install hydraulic test point fitting (13.1)

to inlet port elbow.