TM-5-2350-262-20-3

ARMORED COMBAT EARTHMOVER (ACE), M9

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL; VOLUME 3 OF 3; HYDRAULIC TROUBLESHOOTING TEST PROCEDURES

TM-5-2350-262-20-3 - Page 225 of 319

TM 5-2350-262-20-3

3-190

The No. 4 right and No. 4 left actuators are interconnected through circuit 3 which balances the pressure between

the two actuators. Hydraulic pressure is supplied to the No. 4 right actuator at port 3.

WARNING

High pressure is present in the M9 hydraulic system. Do not disconnect any hydraulic

system component unless hydraulic system pressure has been relieved. Ensure each

hydraulic control lever is moved several times through all positions and hydraulic tank

dipstick is slowly loosened to relieve pressure. Failure to comply may result in severe

injury or death to personnel.

SUSPENSION CIRCUIT

HIGH-PRESSURE

CIRCUIT

RETURN

SUPPLY

COMPONENTS:

1. RETURN LINE FILTER

2. MAIN ACCUMULATOR

3. HIGH-PRESSURE FILTERS

4. DIRECTIONAL CONTROL VALVE

BANK

5. SPRUNG/UNSPRUNG VALVE

6. NO. 4 ACTUATOR, LEFT HAND

7. HYDRAULIC RESERVOIR

8. NO. 3 ACTUATOR, LEFT HAND

9. NO. 2 ACTUATOR, LEFT HAND

10. NO. 1 ACTUATOR, LEFT HAND

11. BUMP STOP CYLINDERS

12. COMPENSATING PUMP

13. CHECK VALVE

14. NO. 1 ACTUATOR, RIGHT HAND

15. NO. 2 ACTUATOR, RIGHT HAND

16. NO. 3 ACTUATOR, RIGHT HAND

17. MAIN HYDRAULIC PUMP

18. NO. 4 ACTUATOR, RIGHT HAND

13

RIGHT REAR CORNER RAISES IN SPRUNG, BUT NOT UNSPRUNG MODE

15

1

2

3

4

5

6

7

8

9

10

11

13

11

14

16

17

18

12