TM-5-2350-378-23-P
ARMORED COMBAT EARTHMOVER (ACE), M9; HYDRAULIC DIAGNOSTIC CENTER
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JUNE 2012
TM-5-2350-378-23-P - Page 304 of 644
WINCH WILL NOT PULL RATED LOAD - Continued
STEP
2.
Perform winch relief valve VB adjustment using HDC.
a.
Reset all HDC solenoid valves by selecting RESET VALVES button (Figure 4, Item 4) on HDC control
box.
WARNING
•
Do not operate ejector when personnel are in bowl. Do not work in bowl unless
ejector lock is engaged. Failure to comply may result in severe injury or death to
personnel.
•
Do not stand or work in bowl area unless ejector lock is engaged. Do not stand in
bowl to observe roller guide travels. Failure to comply may result in severe injury or
death to personnel.
•
When folding dozer blade, work on blade latches from side of vehicle only. Do not
stand in front of dozer blade while retracting ejector. Failure to comply may result in
severe injury or death to personnel.
b.
With engine off, disable ejector; manually close ejector inhibit ball valve V23 (Figure 3, Item 1) on DCV
bank.
1
T01808HDC
Figure 3.
Directional Control Valve (DCV) Bank.
TM 5-2350-378-23&P
0020
0020-4
Back to Top
