TM-5-2350-378-23-P
ARMORED COMBAT EARTHMOVER (ACE), M9; HYDRAULIC DIAGNOSTIC CENTER
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JUNE 2012
TM-5-2350-378-23-P - Page 6 of 644
WARNING SUMMARY - Continued
GENERAL SAFETY WARNINGS DESCRIPTION
- Continued
WARNING
Do not operate ejector when personnel are in bowl. Do not work in bowl unless ejector lock
is engaged. Failure to comply may result in severe injury or death to personnel.
Do not stand or work in bowl area unless ejector lock is engaged. Do not stand in bowl to
observe roller guide travels. Failure to comply may result in severe injury or death to
personnel.
When folding blade, work on blade latches from side of vehicle only. Do not stand in front of
dozer blade while retracting ejector. Failure to comply may result in severe injury or death to
personnel.
WARNING
Do not work under vehicle unless hull is on jack stands and apron lockpins are installed.
Failure to comply may result in severe injury or death to personnel.
WARNING
Before performing any hydraulic troubleshooting in the bowl, move the ejector forward and
disable it by disconnecting the ejector cylinder or by engaging the ejector lock. Failure to
comply may result in severe injury to personnel.
WARNING
High-pressure nitrogen gas is used in this equipment. Keep hands and face away from valves
and hose ends. Failure to comply may result in severe injury or death to personnel.
TM 5-2350-378-23&P
d
Back to Top
