TM-5-2815-241-34-P
ENGINE, DIESEL NTC-290
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT, MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
MARCH 1987
TM-5-2815-241-34-P - Page 241 of 738
TM 5-2815-241-34&P
VIBRATION DAMPER
This task covers:
Cleaning/Inspection
INITIAL SETUP
Tools
Materials/Parts - Continued
Mittens, cloth, heat-protective
Rags, wiping (item 14, appendix B)
Materials/Parts
Equipment Condition
Dye, leak-detection (item 7,
appendix B)
Vibration damper removed (page 2-48).
ACTION
LOCATION
ITEM
REMARKS
CLEANING/INSPECTION
1.
Vibration damper (1)
Wipe clean with rag.
WARNING
Heat-protective cloth mittens must be worn to prevent serious injury to hands when
handling heated parts.
2.
a. Coat with leak-detection dye.
b.
Heat in oven to 200°F (93°C).
c.
Inspect for any indications of leakage.
Discard if leaking.
NOTE
FOLLOW-ON MAINTENANCE: Install vibration damper (page 2-90).
TASK ENDS HERE
TA 242486
2-219
Back to Top
